Harley CNC — The best equipment and service
DMCC - Dubai -UAE
+971504385292
Contact Numbers
Info@harleycnc.com
Email
Doosan PUMA MX2100 Series

Doosan PUMA MX2100 Series

  • Max. turning diameter 540mm
  • Max. workpiece length 1520mm
  • Max. motor power 22kW
Description
Specifications
Complete set
Part types
Description

Doosan MX Milling Lathes Series

Combining a machining center with a turning center provides unrivaled flexibility and productivity, allowing users to complete complex part machining from a single machine.

Milling-Lathes Doosan MX can perform from simple turning and milling operations to more complex simultaneous multi-axis operations.

Doosan MX Machines with Y-axis and B-axis to be installed, have a wide range of processing.

Depending on the model, the Machines MX can be supplied with a tailstock, lower turret and second spindle.

There are three different MX sizes: MX 1600 (6-inch chuck / 51mm bar); MX 2100 (8-inch chuck / 65 mm bar) and MX 2600 (10-inch chuck / 76 mm bar).

Specifications

Classification Unit PUMA MX2100 PUMA MX2100L
Max. processing diameter mm 540 540
Max. workpiece length mm 1000 Class 1500 Class
Standard Chuck Size
(Left / Right Spindle)		 inch 8 / 8 8 / 8
Bar Working Diameter mm 65 65
Max. Spindle Speed r/min 5000 5000
Max. motor power kW 22 22
Milling Spindle Speed r/min 12000 12000
Y-axis Travel mm 170 (±85) 170 (±85)
NC System – FANUC FANUC
Machining Capability – Standards, S, T, ST Standards, S, T, ST
Capability Description – S : Sub-spindle
T : Lower turret		 S : Sub-spindle
T : Lower turret

 

Complete set

STANDARD EQUIPMENT:

  • Chuck control pedal
  • Locking the front door of the safety guard
  • Coolant feed system with chip tray
  • Tailstock with rotating center or counter spindle
  • Integrated spindle motor for turning and milling operations
  • 40-position automatic tool changer
  • Worm and roller pair of spindle tilt axis
  • CNC system Fanuc 31i-A with the ability to control 4 axes simultaneously
  • Protective sheathing of guides, moving parts made of stainless steel
  • Full protection against coolant splash and chip spread
  • Hand tool kit (including small service tools)
  • Leveling screws and plates
  • Machine operation and maintenance manual
  • Safety decals
  • Work area lighting
  • Standard set of tool holders
  • Two-way programming
  • Centralized lubrication device

Additional accessories and options:

  • CNC system Fanuc 31i-A5 for 5-axis simultaneous processing
  • Increasing the capacity of the tool magazine: up to 80-120-240 positions
  • Optional tool holders and drive units
  • Coolant High Pressure Delivery Systems
  • Systems for automatic unloading / loading of parts
  • Active tool control and sizing systems
  • Blow-off / flush / removal / transport systems
  • Built-in graphics editor
  • Tool load monitoring
  • CNC system options
  • Software options

You can get additional information from our managers.

Please note that the manufacturer may change the design and specifications without prior notice.

×

Обратная Связь








Согласие на обработку персональных данных

×
Меню