Doosan PUMA GT 3100 Series

Standard cartridge 12''
Max. workpiece length 1300 мм
Max. motor power 35 kW

Specifications

Complete set

Part types

Description

High Performance Lathes Doosan PUMA GT 3100

TURNING CENTERS Series PUMA GT provide high precision and repeatability, superior performance characteristics and process reliability.

Machines with slideways have 8, 10 and 12-inch chucks (rated for 65/76 / 102mm rods) and are equipped with a spindle of 15.5 and 18.5 kW / 4500 rpm or 26 kW / 3500 rpm depending on the model.

Models GT 2100M, GT 2600M and GT 3100M are also equipped with a 5.5 kW / 5000 rpm power tool).

In addition to their impressive technical characteristics, these Machines are supplied by SFT with automatic tool setters, tailstocks and an Operations Manual / Dialogue Programming System as standard Complete set.

Specifications

Characteristic	units rev	PUMA GT3100	PUMA GT3100L
Max. processing diameter	мм	481	481
Max. workpiece length	мм	750	1300
Std. chuck size	inch	12	12
Spindle bore diameter	мм	102	102
Max. spindle speed	rpm	2800	2800
Max. motor power	kW	35	35
CNC system	–	FANUC / SIEMENS	FANUC / SIEMENS
Available options	–	M	M

М – milling function

** The characteristics of the machine can be changed due to the installed add. options

Complete set

STANDARD EQUIPMENT:

Cartridge 12 inch (Puma GT3100 / M / L / LM)
Raw Cams for Hydraulic Chuck
Clamping confirmation sensor in the chuck
Tailstock: revolving center (except Puma GT2100 / 300 / 300M models)
Tailstock: Manual (except Puma GT2100 / 300 / 300M models)
Turret coolant pump
Chuck control pedal
Locking the front door of the safety guard
Full protection against coolant splash and chip spread
Hand tool kit
Leveling screws and plates
Machine operation and maintenance manual
Safety decals
Work area lighting

Additional accessories and options:

Hardened cams
Double clamping force of the part in the chuck
Steady rest: hydraulic / programmable (Puma GT3100 / M / L / LM)
Tailstock: Programmable
Tailstock: built-in center
Increasing the power for the coolant pump to the turret up to 3/5/7 bar
Cleaning the Coolant cartridge
Coolant cooling station
Coolant oil separator
Coolant pressure sensor
level sensor Coolant
Chip conveyor (side)
Chip conveyor (rear), except models GT2600L / LM / 3100L / LM)
Chip tank
Blowing the chuck jaws with air
Coolant gun
Oil Mist Extractor / Oil mist extraction interface
Manual Tool Adjuster / Automatic Tool Adjuster
Parts catcher with box
Part catcher with conveyor ( Puma 3100)
Automatic front door
Bar feeder interface
Load monitoring system
Auto power off
Signal lamp
Air gun
Optical rulers (X / Z axis)

You can get additional information from our managers.

Please note that the manufacturer may change the design and specifications without prior notice.

Design and specifications are subject to change without prior notice.

Doosan PUMA GT 3100 Series

Description

Specifications

Complete set

Part types

Обратная Связь