KCV-5AX Series Tilting Head Vertical Designed for long Aerospace/Oilfield parts but performs so well its been adopted by many companies in the Automotive industry for some of the truck/Semi Axle parts.
OKK KCV-5AX Series
Specifications
| Item | Unit | KCV800-5AX | KCV1000-5AX | |
| Travel | Travel on X axis (Table: right/left) | mm | 3050 (120.08″) | 3500 (137.80″) |
| Travel on Y axis (Column: back/forth) | mm | 820 (32.28″) | 1020(40.16″) | |
| Travel on Z axis (Spindle head: up/down) | mm | 720 (28.35″) | 720 (28.35″) | |
| Travel on A axis (Spindle head: back/forth) | deg | -35 to 35 OP: -40 to 40 | -35 to 35 OP: -40 to 40 | |
| Travel on В axis (Spindle head: right/left) | deg | -35 to 35 OP: -40 to 40 | -35 to 35 OP: -40 to 40 | |
| Distance from table top surface to spindle nose | mm | 200 (7.87″) to 920 (36.22″) | 200 (7.87″) to 920 (36.22″) | |
| Distance from column front to spindle center | mm | 830mm (32.68″) | 1085 (42.72″) | |
| Table | Table work surface area (X-axis direction x Y-axis direction) | mm | 3300X820 (129.92″X32.28″) | 3800X1020 (149.60″X40.16″) |
| Max. workpiece weight loadable on table | kg | 3000 (6600 lbs) | 4000 (8800 lbs) | |
| Table work surface configuration (T-stot nominal dimension x spacing x number cf T slots) | mm | 22 (0.87″) X140 (5.51′) X 5 slots | 22 (0.87″) X140 (5.51″) X 7 slots | |
| Distance to the table work surface from the floor | mm | 980 (38.58″) | 1000 (39.37″) | |
| Spindle | Spindle speed | min’1 | 35 to 12000 | 35 to 12000 |
| Number of spindle speed chanqe steps | Stepless | Stepless | ||
| Spindle nose (nominal number) | 7/24 taper. No.50 | 7/24 taper. No.50 | ||
| Spindle bearing bore diameter | mm | Ф 100mm (03.94”) | 0100(03.94″) | |
| Feed Rate | _ .. X, Y and Z axes: | m/min | XY=24 (945 ipm) Z=20 (787 ipm) | XYZ=20 (787 ipm) |
| Rapid traverse rate . _
A and В axes |
min1 | A=10 B=10 | A=10 B=10 | |
| r, ittinn teoH r=)o i X‘ Y and Z aXeS: | mm/min | 1 to 10000 (0.04 to 394 ipm) | 1 to 10000 (0.04 to 394 ipm) | |
| (suiting feed tale , , _
A and В axes |
min1 | A=10 B=10 | A=10 B=10 | |
| Automatic Tool Changer | Tool shank (nominal number) | JIS В 6339 BT50 | JIS В 6339 BT50 | |
| Pull stud (nominal number) | OKK only 90″ | OKK only 90° | ||
| Number of stored tools | tools | 30 tools | 30 tools | |
| Maximum tool diameter (with adjacent tools) | mm | 0100(03.94″) | 0100(03.94″) | |
| Maximum tool diameter (without adjacent tools) | mm | 0200 (07.87″) | 0200 (07.87″) | |
| Maximum tool length (from the gauge line) | mm | 350 (13.78″) | 350 (13.78″) | |
| Maximum tool weight | kg | 20 (44 lbs) | 20 (44 lbs) | |
| Tool selection method | Address fixing method | Address fixing method | ||
| Tool exchange time (tool-to-tool) | sec | 2.5 | 2.5 | |
| Tool exchange time (cut-to-cut) | sec | 13 | 15 | |
| Motors | For spindle (30min rating/continuous rating) | kW | 45/37 (60HP/50HP)
OP: 40/25 (54HP/34HP) (15%ED/cont.) |
45/37 (60HP/50HP)
OP: 40/25 (54HP/34HP) (15%ED/cont.) |
| _ . . X, Y and Z axes | kW | FANUC X/Y/Z: 9.0 (12HP) | FANUC X/Y: 6.0 (8HP) Z: 9.0 (12HP)X2 | |
| For feed axes j- , . _
A and В axes |
kW | FANUCA/B: 4.0 (5HP) | FANUCA/B: 4.0 (5HP) | |
| Requited Power Supply | Power supply | kVA | FANUC: 76 | FANUC: 87 |
| Supply voltage x supply frequency | VXHz | 200± 10%X 50/60±1 220±10%X60±1 *1 | 200± 10% X 50/60± 1 220±10%X60±1 *1 | |
| Compressed air supply pressure | MPa | 0.4 (58 psi) to 0.6 (87 psi)*2 | 0.4 (58 psi) to 0.6 (87 psi)*2 | |
| Compressed air supply flow rate | L/min(ANR) | 400 (106 qpm)*3 | 400 (106 qpm)*3 | |
| Tank Capacity | Coolant tank | L | 1000 (264 gal) | 1000 (264 qal) |
| Spindle head cooling oil tank | L | 70 (18 qal) | 70 (18 qal) | |
| Spindle lubricating oil tank | L | 2 (0.5 gal) | 2 (0.5 gal) | |
| Slideway lubricating oil tank | L | 6 (1.6 gal) | 6 (1.6gal) | |
| Hydraulic unit tank | L | 20 (5 gal) | 20 (5 gal) | |
| Machine Size and Required Floor Space | Machine height from the floor surface | mm | 4200 (165.35″) | 3730 (146.85″) |
| Floor space required for operation (width x depth) | mm | 8620X5255 (339.37″X206.89″) | 9714X5703 (382.44″ X 224.53″) | |
| Floor space including maintenance area (width x depth) | mm | 8620X6000 (339.37″X236.22″) | 10714 X 6203 (421.81″ X 244.21″) | |
| Machine weight | kg | 25000 (55100 lbs) | 32000 (70500 lbs) | |
| Controller type | F30i | F30i | ||
| Temperature of operation environment | ■c | 5 to 40 | 5 to 40 | |
| Item | Unit | KCV800-5AX | KCV1000-5AX | |
| Travel | Axis movement — X (Table back / forth) | мм | 3050 (120.08″) | 3500 (137.80″) |
| Axis movement — Y (stance: back / forward) | мм | 820 (32.28″) | 1020(40.16″) | |
| Axis movement — Z (Spindle Head: Right / Left) | мм | 720 (28.35″) | 720 (28.35″) | |
| Axis movement —A (Spindle Head: Right / Left) | degrees | -35 to 35 OP: -40 to 40 | -35 to 35 OP: -40 to 40 | |
| Axis movement —В (Spindle Head: Right / Left) | degrees | -35 to 35 OP: -40 to 40 | -35 to 35 OP: -40 to 40 | |
| Distance from table surface to spindle edge | мм | 200 (7.87″) to 920 (36.22″) | 200 (7.87″) to 920 (36.22″) | |
| Distance from the face of the rock to the center of spindle | мм | 830mm (32.68″) | 1085 (42.72″) | |
| Table | Table working surface area (direction and axis X – direction and axis Y) | мм | 3300X820 (129.92″X32.28″) | 3800X1020 (149.60″X40.16″) |
| Max. mass workpieces and supplied per hundred | Kg | 3000 (6600 lbs) | 4000 (8800 lbs) | |
| Confand guratsand I work surfaceand Table (T--cell nominal size - and intervalL - chand withLo T-cells) | мм | 22 (0.87″) X140 (5.51′) X 5 slots | 22 (0.87″) X140 (5.51″) X 7 slots | |
| Distance from floor to work surface | мм | 980 (38.58″) | 1000 (39.37″) | |
| Spindle | Spindle speed | min’1 | 35 to 12000 | 35 to 12000 |
| Number of speeds Spindle | no speeds | no speeds | ||
| Spindle edge (Nominal number) | 7/24 taper. No.50 | 7/24 taper. No.50 | ||
| Spindle bearing bore diameter | мм | Ф 100mm (03.94”) | 0100(03.94″) | |
| Feed rate | _ .. X, Y and Z axis : | м/min | XY=24 (945 ipm) Z=20 (787 ipm) | XYZ=20 (787 ipm) |
| Fast travel speed move. _
A and В axis |
min1 | A=10 B=10 | A=10 B=10 | |
| r, ittinn teoH r=)o i X‘ Y and Z aXeS: | мм/min | 1 to 10000 (0.04 to 394 ipm) | 1 to 10000 (0.04 to 394 ipm) | |
| (transmitting transmission , , _
A and В axis |
min1 | A=10 B=10 | A=10 B=10 | |
| Automatic tool change | Tool shank (Nominal number) | JIS В 6339 BT50 | JIS В 6339 BT50 | |
| Pull rod (Nominal number) | OKK only 90″ | OKK only 90° | ||
| Capacity For Tool Storage | toolы | 30 tools | 30 tools | |
| Max. tool diameter (with adjacent and mand toolmand ) | мм | 0100(03.94″) | 0100(03.94″) | |
| Max. tool diameter (no adjacent x tools) | мм | 0200 (07.87″) | 0200 (07.87″) | |
| Max. tool length (From collabration line) | мм | 350 (13.78″) | 350 (13.78″) | |
| Max. weight tool | Kg | 20 (44 lbs) | 20 (44 lbs) | |
| Tool selection Method | Address fixing method | Address fixing method | ||
| Tool change time (Cut to cut ) |
sec | 2.5 | 2.5 | |
| Tool change time (cut to cut) | sec | 13 | 15 | |
| Engines | For Spindle(30-min. Rating / permenant rating) | kV | 45/37 (60HP/50HP)
OP: 40/25 (54HP/34HP) (15%ED/cont.) |
45/37 (60HP/50HP)
OP: 40/25 (54HP/34HP) (15%ED/cont.) |
| _ . . X, Y and Z axis | kV | FANUC X/Y/Z: 9.0 (12HP) | FANUC X/Y: 6.0 (8HP) Z: 9.0 (12HP)X2 | |
| For feed axes j- , . _
A and В axis |
kV | FANUCA/B: 4.0 (5HP) | FANUCA/B: 4.0 (5HP) | |
| Required power supply | Energy consumption | kVА | FANUC: 76 | FANUC: 87 |
| Supply voltage x supply frequency | V х Hz | 200± 10%X 50/60±1 220±10%X60±1 *1 | 200± 10% X 50/60± 1 220±10%X60±1 *1 | |
| Compressed air pressure | MPa | 0.4 (58 psi) to 0.6 (87 psi)*2 | 0.4 (58 psi) to 0.6 (87 psi)*2 | |
| Compressed air consumption | L/min (ANR) | 400 (106 qpm)*3 | 400 (106 qpm)*3 | |
| Tank volume | For coolant tank | L | 1000 (264 gal) | 1000 (264 qal) |
| Cooling Oil tank for spindle head | L | 70 (18 qal) | 70 (18 qal) | |
| tank oil Spindle | L | 2 (0.5 gal) | 2 (0.5 gal) | |
| Lubricating oil reservoir | L | 6 (1.6 gal) | 6 (1.6gal) | |
| Hydralic unit tank | L | 20 (5 gal) | 20 (5 gal) | |
| Machine size and need and my space | Machine height from floor surface | мм | 4200 (165.35″) | 3730 (146.85″) |
| Required area (width x depth) | мм | 8620X5255 (339.37″X206.89″) | 9714X5703 (382.44″ X 224.53″) | |
| Area of the floor, including the service area (width x depth) | мм | 8620X6000 (339.37″X236.22″) | 10714 X 6203 (421.81″ X 244.21″) | |
| Weight | Kg | 25000 (55100 lbs) | 32000 (70500 lbs) | |
| Controller type | F30i | F30i | ||
| Working enviroment tempreture | ■c | 5 to 40 | 5 to 40 | |
×